HCDP Electronics Logo email info@hcdpelectronics.co.za
phone +27 12 548 1938

Related Products
Product Code: EPP1 MK2 R01

Product Information Technical Notes Product Documents Print
Product Information
  • 220VAC to 12 Volt 12 Amp 3-state (constant current, constant voltage & float charge)Lead-Acid Battery Charger with Fast and Trickle charge indicator
  • Unique DC to DC 12V 12 Amp Charger (no need for a separate dual battery switch)
  • Optional 300W 230VAC modified sine wave inverter
  • Auto DC charger bypass when charging from vehicle (full 12A available to charge battery while fridge etc. runs directly from vehicles alternator)
  • DC to DC charger has auto ON and OFF vehicle voltage sensing switch
  • Battery under voltage lockout to prevent deep cycling and damage to battery
  • Integrated 120 Watt Solar Charge Controller
  • Ditital Voltage and Current Monitor
  • LED charge source indicator
  • Integral thermostatically controlled cooling fan
  • Integrated 220VAC Earth Leakage unit and overload Circuit Breaker.
  • 1x 3-pin SA and 1x EURO 220VAC output sockets
  • Can operate from any combination of 220VAC, Battery or Solar Panel
  • Short circuit protection on all outputs
  • Easy to install
LED indicators
  • SP LED
    • turns green if charging from solar panel and if 220VAC charger is switched OFF
  • DC LED
    • turns green if charging from vehicle
  • AC LED
    • turns Amber if fast charging and charging current is more than 4A
    • turns Green if trickle charging and current is less than 4A but more than 2A
    • flashes Green at 1Hz if battery is fully charged and waiting to top up battery
    • flashes Red at 1Hz if battery is faulty and battery voltage remains below 9V
    • flashes Green and Amber alternatively at 1Hz if battery is not detected. This can happen if battery is not present, battery fuse is blown or if battery connection is faulty
Technical Notes
Power Panel
Operating ambient temperature -20C to +45C
Mass gram
Dimensions 270(W)x300(D)x100(H) mm3
220VAC Charger
Input voltage 120VAC to 265VAC 40Hz to 70Hz
Input connector Standard 3-pin kettle cord
Trickle charge current 1 to 2.5 Amp nominal (Green AC LED ON)
Fast charge current 12 Amp Maximum (Amber AC LED ON)
Fast charge voltage 14,2V +/- 0,1V
Trickle charge voltage 13.8V +/- 0.1V
Vehicle DC Charger
Input voltage (Vehicle GND & POS) 10.5VDC to 15VDC
Ignition sense switch ON > 13,3V
Ignition sense switch OFF < 12.5V
Input connection Vehicle GND, POS & Ignition (Black, Red & Yellow Power-Pole connector)
Charge voltage 14.2V +/- 0.1V
Charging current 12 Amp maximum with Ignition ON
Input current 30A maximum
Drain from vehicle battery Zero Amp with ignition OFF
Note This DC to DC charger eliminates the need for a dual battery switch
Solar Panel Charger
Input voltage 16VDC to 26VDC
Power input 120W maximum
Charge voltage 14VDC
Charging current Depends on Solar Panel Wattage
Battery Monitor
Type Digital 3.5x 7 segment display
Voltage Range 9.00 to 19.99 Volt
Current Range 0.1A to 19.99A
Accuracy +/- 0.05 Volt
+/- 0.2 Amp
Optional 230VAC 300W Inverter
Output wave form Modified sine wave
Input voltage 11VDC to 15VDC
Output power 300W continious
Battery Under Voltage Lockout
Lockout voltage 10.5 +/-0.25 Volt
Auto turn ON voltage 12.5 +/- 0.25 Volt
Manual turn ON voltage > 10.75 Volt
Battery Connection
50A Brad Harrison connector
Pump 1x 12 Volt 7 Amp maximum Switched
Fridge 1x 12 Volt 7 Amp maximum
Lights 2x 12 Volt 5 Amp total maximum Switched
Sockets 1x 12 Volt 11 Amp total maximum
220 VAC 1x 220VAC 10 Amp total maximum.
AC 220VAC 50Hz 16A max IEC 3-pin socket
Vehicle GND, Positive & Ignition(Black, Red & Yellow Power Pole connector)
Solar 1x 5.08mm Green connector
fake watches imitation watches replica rolex fake Rolex