HCDP Electronics Logo email info@hcdpelectronics.co.za
phone +27 12 804 1377


Products
Related Products
Power Panel MK3c with 180W Solar Panel Charger
Product Code: HPP1 MK3c
Model:
Discontinued

Product Information Technical Notes Product Documents Print
Product Information
  • 220VAC to 12 Volt 12 Amp 3-state (constant current, constant voltage & float charge)Lead-Acid Battery Charger with Fast and Trickle charge indicator
  • Unique DC to DC 12V 12 Amp Charger (no need for a separate dual battery switch)
  • Optional 300W 230VAC modified sine wave inverter
  • Auto DC charger bypass when charging from vehicle (full 12A available to charge battery while fridge etc. runs directly from vehicles alternator)
  • DC to DC charger has auto ON and OFF vehicle voltage sensing switch
  • Battery under voltage lockout to prevent deep cycling and damage to battery
  • Integrated 180 Watt Solar Charge Controller
  • Integrated Battery Voltage Monitor
  • LED charge source indicator
  • Integral thermostatically controlled cooling fan
  • Integrated 220VAC Earth Leakage unit and overload Circuit Breaker.
  • 1x 3-pin SA and 1x EURO 220VAC output sockets
  • Can operate from any combination of 220VAC, Battery or Solar Panel
  • Short circuit protection on all outputs
  • Supplied with mounting hardware
  • Supplied with all connectors required
  • Easy to install
Technical Notes
Power Panel
Operating ambient temperature -20C to +45C
Mass gram
Dimensions Without inverter 235(W)x235(D)x100(H) mm3
With inverter 235(W)x315(D)x100(H) mm3
220VAC Charger
Input voltage 120VAC to 265VAC 40Hz to 70Hz
Input connector Standard 3-pin kettle cord
Trickle charge current 1 to 2.5 Amp nominal (Green AC LED ON)
Fast charge current 12 Amp Maximum (Amber AC LED ON)
Fast charge voltage 14,2V +/- 0,1V
Trickle charge voltage 13.8V +/- 0.1V
Vehicle DC Charger
Input voltage (Vehicle GND & POS) 10.5VDC to 15VDC
Ignition sense switch ON > 13,3V
Ignition sense switch OFF < 12.5V
Input connection Vehicle GND, POS & Ignition (Black, Red & Yellow Power-Pole connector)
Charge voltage 14.2V +/- 0.1V
Charging current 12 Amp maximum with Ignition ON
Input current 30A maximum
Drain from vehicle battery Zero Amp with ignition OFF
Note This DC to DC charger eliminates the need for a dual battery switch
Solar Panel Charger
Input voltage 16VDC to 26VDC
Power input 180W maximum
Charge voltage 14VDC
Charging current Depends on Solar Panel Wattage
Battery Monitor
Voltage Range 10 to 14.5 Volt
Accuracy +/- 0.25 Volt
Optional 230VAC 300W Inverter
Output wave form Modified sine wave
Input voltage 11VDC to 15VDC
Output power 300W continious
Battery Under Voltage Lockout
Lockout voltage 10.5 +/-0.25 Volt
Auto turn ON voltage 12.5 +/- 0.25 Volt
Manual turn ON voltage > 10.75 Volt
Battery Connection
50A Brad Harrison connector
Outputs
Pump 1x 12 Volt 7 Amp maximum Switched
Fridge 1x 12 Volt 7 Amp maximum
Lights 2x 12 Volt 5 Amp total maximum Switched
Sockets 1x 12 Volt 11 Amp total maximum
220 VAC 1x 220VAC 10 Amp total maximum.
Inputs
AC 220VAC 50Hz 16A max IEC 3-pin socket
Vehicle GND, Positive & Ignition(Black, Red & Yellow Power Pole connector)
Solar 1x 5.08mm Green connector