HCDP Electronics :: Products

Products

Related Products

	Upgrade Power Panel for Conqueror Product Code: CPP1 MK1/D/I Model: Discontinued

Product Information

Technical Notes

Product Documents

Product Information

CPP1 MK1/D/I
Upgrade Power Panel for Conqueror Companion

Features 220VAC 12V 12A 3-state Lead-Acid battery charger with fast and trickle charge indicator DC toDC 12V 12A charger that eliminates dual battery switch Auto DC charger bypass ensures that full 12A is always available to charge battery Battery under voltage lockout to deep cycling damage to battery Integrated 180W solar charge controller Digital battery Voltage and Current monitor LED charge source indicator Integrated 220VAC Earth Leakage and overload Circuit Breaker Pre-wired for Geyser 1x 3-pin SA and 1x Euro 220VAC output sockets 220VAC multiplug outlet 220VAC Geyser outlet Supplied complete with input & output connectors and moubting hardware

Technical Notes

Specifications

		Power Panel
Operating ambient temperature	:	-20C to +45C
Mass	:	gram
Dimensions	:	mm3

		220VAC Charger
Input voltage	:	120VAC to 265VAC 40Hz to 70Hz
Input connector	:	Standard 3-pin kettle cord
Trickle charge current	:	1 to 2.5 Amp nominal (Green AC LED ON)
Fast charge current	:	12 Amp Maximum (Amber AC LED ON)
Fast charge voltage	:	14,2V +/- 0,1V
Trickle charge voltage	:	13.8V +/- 0.1V

		Vehicle DC Charger
Input voltage (Vehicle GND & POS)	:	10.5VDC to 15VDC
Ignition sense switch ON	:	> 13,3V
Ignition sense switch OFF	:	< 12.5V
Input connection	:	Vehicle GND, POS & Ignition (Black, Red & Yellow Power-Pole connector)
Charge voltage	:	14.2V +/- 0.1V
Charging current	:	12 Amp maximum with Ignition ON
Input current	:	30A maximum
Drain from vehicle battery	:	Zero Amp with ignition OFF
Note	:	This DC to DC charger eliminates the need for a dual battery switch

		Solar Panel Charger
Input voltage	:	16VDC to 26VDC
Power input	:	180W maximum
Charge voltage	:	14VDC
Charging current	:	Depends on Solar Panel Wattage

		Battery Monitor
Type	:	Digital 3.5x 7 segment display
Voltage Range	:	9.00 to 19.99 Volt
Current Range	:	0.1A to 19.99A
Accuracy	:	+/- 0.05 Volt
	:	+/- 0.2 Amp

		220VAC 150W Inverter
Output wave form	:	True sine wave
Input voltage	:	11VDC to 15VDC
Output power	:	150W continious

		Battery Under Voltage Lockout
Lockout voltage	:	10.5 +/-0.25 Volt
Auto turn ON voltage	:	12.5 +/- 0.25 Volt
Manual turn ON voltage	:	> 10.75 Volt

		Battery Connection
		50A Brad Harrison connector

		Outputs
Pump	:	1x 12 Volt 7 Amp maximum Switched
Fridge	:	1x 12 Volt 7 Amp maximum
Lights	:	2x 12 Volt 5 Amp total maximum Switched
Sockets	:	1x 12 Volt 11 Amp total maximum
220 VAC	:	1x 220VAC 10A 3-pin Amp maximum.
	:	1x 220VAC Euro 10A max IEC 2-pin
	:	1x 220VAC 10A max IEC 3-pin multiplug

		Inputs
AC	:	220VAC 50Hz 16A max IEC 3-pin socket
Vehicle	:	GND, Positive & Ignition(Black, Red & Yellow Power Pole connector)
Solar	:	1x 5.08mm Green connector

Also available without inverter and/or DC to DC charger. Enquire at factory for prices.

Operating instructions

Switch 12V switch ON when fridge, lights, etc should operate. Switch 12V switch OFF when fridge, lights, etc are NOT required to operate.

Any combination of AC, DC & Solar power source may be used simultaneously.

Take care when using inverter. At full power a 230VAC 150W inverter draws about 18A from battery and will flatten a 100Ah battery in 4 hours.

Mounting/Connection information

Mount in cool dry position using the supplied M6x10 hexagon bolts and nuts or alernatively mount using the supplied self tapper screws.

Do not expose to rain or water

	FIND US		NAVIGATE		DISCLAIMER
21Bianca Crescent (Montana Park) Pretoria South Africa			Discontinued products Who We Are Warranties