220VAC to 12 Volt 12 Amp Multistage Lead-Acid Battery Charger with Fast and Trickle charge indicator.
AC charger optimised for Lead Crystal batteries
AC charger with battery temperature sensor to adjust battery charging voltage based on battery temperature.
Digital Voltage and Current Monitor
Optional 180W 220VAC true sine wave inverter
Battery under voltage lockout to prevent deep cycling and damage to battery
Battery low and blown fuse indicator
Integrated 270 Watt Solar Charge Controller with MPPC
LED charge source indicator
Integral thermostatically controlled cooling fan
Can operate from any combination of 220VAC, Battery or Solar Panel
Short circuit protection on all outputs
Supplied with mounting hardware
Supplied with all connectors required
Easy to install
Warranty now 2 years from 2014
LED indicators
BL LED turns ON if 12V outputs are turned OFF due to battery voltage dropping below 10.5V
BF LED turns ON if main 30A battery fuse is blown
SP LED
turns green if charging from solar panel and if 220VAC charger is switched OFF
AC LED
turns Amber if fast charging and charging current is more than 4A
turns Green if trickle charging and current is less than 4A but more than 2A
flashes Green at 1Hz if battery is fully charged and waiting to top up battery
flashes Red at 1Hz if battery is faulty and battery voltage remains below 9V
flashes Green and Amber alternatively at 1Hz if battery is not detected. This can happen if battery is not present, battery fuse is blown or if battery connection is faulty
blinks Red if temperature sensor fault occurs or if sensor is disconnected and defaults to 35°C
Battery Temperature Sensor
Place sensor close to battery to pick up battery temperature
Technical Notes
HPP1 MK5 StdAC
HCdP Power Panel MK5 with Digital Battery Monitor and Multiplug Outlet
info@hcdpelectronics.co.za
+27 12 548 1938
